12 Companies Leading The Way In Replacement Locks For Patio Doors
Replacement Locks For Patio Doors at Lowe's
Replacing a patio door lock is a straightforward and efficient way to increase the security of your home. However the correct installation and regular maintenance are essential.
It is important to know what kind of patio door lock you have in order to replace it with success. The screw hole size and type of faceplate on the end will help you identify the kind of lock you are replacing.
Identifying your existing lock
It is essential to know the differences between different types of locks prior to deciding to purchase new hardware for your lock. This will allow you to find a replacement that is perfect for your home, and also ensure the safety and security of your home.
The most well-known type of lock is the cylinder lock also known as pin and tumbler locks. This lock type uses combination bottom pins, springs and top pins to secure the keyhole and plug. Cylinder locks are available in different sizes. It is essential to determine the length and diameter of the cylinder you have before you purchase the new one.
To determine the width to determine the width, loosen the screws that hold the cylinder in position and carefully pull it out. Then, take a measurement of the distance between the outside edge of the cylinder and its inner edge, taking note of the measurement in millimeters. Compare this measurement with the measurements of the lock you plan to purchase. This will help ensure that your new lock is the correct size and fits in the hole in the door lock.
A key can be used to test the dimensions of a lock that is already in use. If front door locks replacement wakefield Repair My Windows And Doors into the cylinder with ease and is in the correct size, it's the width of the rekeying kit you require. If the key doesn't slide in, it's likely that your cylinder has different keyways and cannot be rekeyed to accept that key brand.
It is always best to follow the instructions of the manufacturer that come with a rekey kit, as each type of lock has its own unique set of installation requirements. It is important to test the new lock thoroughly after installation to ensure that it functions properly and offers you maximum security. You should also be aware of the additional features of your new lock, as these can affect its ease of use.
Measure the Width
A patio door lock that is not working correctly could lead to serious security issues. It's essential to regularly inspect your locks and replace them when necessary. This will ensure that they are operating properly and are safe. It may also help to prevent problems such as a damaged latch or keyway. If your current locks are damaged or worn out, damaged, you can find replacements at Lowe's that will give you the security your home needs.
It is essential to measure the door to your patio before purchasing an additional lock. This will help you to determine the right size lock to purchase and avoid the risk of buying the wrong lock. fit. You'll need two measurements in order to do this which are the backset and case depth. The former is the distance from the edge of the lock's face to the centre of the round hole through which the spindle's handle enters, while the latter refers to the depth of the lock's body that is visible from the outside of the door.
When deciding on the kind of lock you want to use it is essential to think about how you'll be using your doors. If your sliding doors open horizontally, you'll require top-and-bottom tab lock that is able to engage with the strikeplate, stopping it from being pushed or forcefully opened. If your patio doors are vertically oriented, you'll need to choose a mortise lock with a spring-loaded hook latch that adds additional security.
It's important to note the location of the screw holes when determining the size of your lock. Some mortise locks have round screws, while others use square screws. You'll have to know where the keyway is. Some keys have a vertical design and others are tilted at 45 degrees. Take a picture of the lock using your digital camera to ensure that you get the right replacement.
After you've gotten your measurements, it's now time to shop for the best patio door lock. On the internet, you'll find a variety of high-quality locks. Many branded products offer advanced security features to ensure your home's security. It is essential to research locks and read reviews prior to you make a purchase. Also, make sure to regularly clean your locks to stop dirt and other debris from interfering with the function of your doors.
Pay attention to the Screw Holes
Patio doors play an important part in protecting your home and should be checked for signs of wear and tear to ensure they're working correctly. Over time, your locks and spindle that connects the interior and exterior handles are likely to require replacement. A sturdy lock will not only block unintentional entry, but it also increases energy efficiency, safety and security.
If you're not sure of the exact type of lock your patio door has There are a variety of ways to narrow down your search for an alternative. To begin, identify the type of keyway that is used. Aluminum patio doors are typically equipped with a mortise locks that are rectangular cutouts and E2126 or E2079 locks are set in a recess within the frame. Uploading a photograph of the lock using a digital camera can help you determine what type it is.
You can also determine the type of lock by examining the screw holes. The majority of sliding patio door locks have screw holes that align with the latch keeper on the side jamb, however they are not always identical. Some screws may be longer than others or have a different threaded finish. Some screws have washers or a hexagonal nut attached, which can change the way they fit into the lock's hasp.
Once you've got a clear idea what kind of lock you have you can begin preparing for the installation of a new lock. The first step is to clean the lock with a soft cloth or brush to remove any debris or dirt that could hinder its operation. After cleaning, you can apply a silicone-based lubricant in order to keep the locking mechanism smooth and quiet.
It's a great idea replace your screws with a longer one. This will allow you to get more grip and also install the lock with less effort. After you've done this it's a good idea to test the handle to determine how the latch works with the lock.
If it's not able to engage quickly You may have to put an hex nut or washer behind the hasp to get it to hold more of the door's lip. You could even put a shim on the side of the lock keeper that is on the jamb to see if it can help.
Check the Lock Snib
The snib or lock mechanism, is situated within the handle of the door. The snib can be turned off and on to open or close your patio doors, and is the first thing you need to check for when your locks aren't functioning properly. You should also examine the keepers at the top and bottom door frames to see if there is any misalignment or looseness which could cause them break. Check that your snib is correctly seated and that the lock has not become stuck or blocked in any other way.
The most popular patio door locks are made of steel mortise latches that hold your sliding glass doors in place. They're inserted into the door frame and are available in various styles which makes them a great security measure. Some are designed to accommodate keys, while others use an oval-shaped cutout for simple locking and unlocking.
Another option is a thumb-screw-style step-on lock that secures your sliding doors in place without requiring you to turn the knob or use the key. These locks are commonly found on older doors with metal frames, but they can also be used to secure vinyl or wooden-framed sliding door frames.
When you examine your existing patio lock, note the type and size of screw holes used to mount the escutcheon as well as the lock body. This will allow you to choose a lock that has the appropriate screw holes. It's a good idea to examine your strike plate to ensure it's securely secured.
If you own Jason Windows boltlock sliding doors from 2000-2009, make sure the keeper screws are secure and not loosened or missing. The screws hold the snib open in "vent" mode to allow airflow while promoting security. They are also important to stop your lock from being sheared. All locks must be inspected and cleaned regularly to keep dirt, dust, corrosion or other debris from hindering their operation.
If your snib broke it is possible to replace the entire strikeplate and the snib. If your snib only requires to be aligned it can be corrected by removing the strikeplate with a putty blade and backing out the adjustment screws (located above and beneath the screw). Then, you'll be required to move the strikeplate upwards or down until the tongue of engagement is aligned with the Milgard logo.